Wind Deflector Pair for ND MX5 (Uncoated Version)
This is the same as the original, but without the matte clear coat. The part is made of PMMA acrylic with a UV stabilizer and should have good weather resistance, but it’s a bit shinier, and will have minor inconsistencies in the color and texture like any unfinished plastic piece.
As with the original, this version reduces wind buffeting when driving top up or down, and reduces internal cabin volume in both the RF and soft top. Attaches with 3M VHB tape specifically made for automotive trim.
About the weather: 3M recommends installing the tape when the ambient temperature will be 70F+ for 48 hours afterwards, with a hard minimum of 50F+. Please keep in mind that the tape may fail if the parts are installed in colder weather. After 48 hours, the tape will withstand the normal range of weather and temperatures that a vehicle would be exposed to.
International orders - If you don’t see your country in the shipping options, please send me a request via the “Contact Me” link and I’ll look it up for you. My surcharges for international shipping do not include any import tariffs that your country may levy, please check with your local authority to estimate what (if any) tariff you may owe for final receipt of the package.
This is the same as the original, but without the matte clear coat. The part is made of PMMA acrylic with a UV stabilizer and should have good weather resistance, but it’s a bit shinier, and will have minor inconsistencies in the color and texture like any unfinished plastic piece.
As with the original, this version reduces wind buffeting when driving top up or down, and reduces internal cabin volume in both the RF and soft top. Attaches with 3M VHB tape specifically made for automotive trim.
About the weather: 3M recommends installing the tape when the ambient temperature will be 70F+ for 48 hours afterwards, with a hard minimum of 50F+. Please keep in mind that the tape may fail if the parts are installed in colder weather. After 48 hours, the tape will withstand the normal range of weather and temperatures that a vehicle would be exposed to.
International orders - If you don’t see your country in the shipping options, please send me a request via the “Contact Me” link and I’ll look it up for you. My surcharges for international shipping do not include any import tariffs that your country may levy, please check with your local authority to estimate what (if any) tariff you may owe for final receipt of the package.
This is the same as the original, but without the matte clear coat. The part is made of PMMA acrylic with a UV stabilizer and should have good weather resistance, but it’s a bit shinier, and will have minor inconsistencies in the color and texture like any unfinished plastic piece.
As with the original, this version reduces wind buffeting when driving top up or down, and reduces internal cabin volume in both the RF and soft top. Attaches with 3M VHB tape specifically made for automotive trim.
About the weather: 3M recommends installing the tape when the ambient temperature will be 70F+ for 48 hours afterwards, with a hard minimum of 50F+. Please keep in mind that the tape may fail if the parts are installed in colder weather. After 48 hours, the tape will withstand the normal range of weather and temperatures that a vehicle would be exposed to.
International orders - If you don’t see your country in the shipping options, please send me a request via the “Contact Me” link and I’ll look it up for you. My surcharges for international shipping do not include any import tariffs that your country may levy, please check with your local authority to estimate what (if any) tariff you may owe for final receipt of the package.